Adjusting Throttle Play - GSR750

[TheArchitect]

I have 6-8mm of play in my throttle and it's really annoying me now. I understand the normal for most bikes is 2-3mm.

I'd like to adjust it but want to be sure I'm doing it right. I've seen a few vids of it being done but still not sure which adjuster to adjust and how much.

Can someone please see attached pic and let me know what to adjust and how? I've labelled it on the pic for easy reference. In layman's terms would be best so I don't miss something.

Many thanks

https://i.imgur.com/vqVXije.jpg
____________________
GSXR 600 K6 - Stolen
GSXR 600 K6 - Stolen
MT09 - Almost stolen

[Vincent]

Unscrew the locking ring on "A", then unscrew the larger part. When at the right place, re-tighten the locking ring. You may find it easier if you remove the rubber cap on the end of the adjuster first.

However, with so much play, I'd prefer to take up the slack at the other end......depending how the cable is attached there.

Edit:Looking at a pic of a cable on eBay, you can take the slack up at the other end.
____________________
Space Is Deep

[TheArchitect]

Cheers, Vincent

When you say "the other end", what do you mean?
____________________
GSXR 600 K6 - Stolen
GSXR 600 K6 - Stolen
MT09 - Almost stolen

[Vincent]

[TheArchitect]

[Vincent]

[Vincent]

You have all the adjustment available so you should be OK. The locking ring needs to go clockwise to loosen it then the main part anti-clockwise until it's adjusted enough. Remember to leave a small amount of play.
____________________
Space Is Deep

[TheArchitect]