|
|
| Author |
Message |
| bikertomm |
This post is not being displayed .
|
 bikertomm World Chat Champion

Joined: 03 Jul 2010 Karma :   
|
 Posted: 22:27 - 04 Mar 2014 Post subject: Oil change.. how much!? Also mechanic query, abs brake pads? |
 |
|
Looking at doing my first oil change on a bike (my hornet) soon.
Have just bought an oil filter and crush ring for the sump, £15.
4 Litres of castrol's finest is coming in at £40, found it for £30 online.
So near enough 50 spunking pound!
Still, looking forward to doing it, only worry is the oil filter is going to be a bitch to get off- but hopefully not. Any tips?
Also, on another note:
Is it generally acceptable to say buy my own brake pads and ring up and ask mechanics if they would be interested in fitting them?
Or will I be laughed at down the phone? I'm guessing they make a certain profit through parts?
It's looking like I can get brake pads for front and rear for £40 (Goldfren?)
I don't just want any old shitty pads put in - any advice on this?
This means I can do my own oil change and have new pads for under £100. Then say labour of £60+ I think I'll be happy with.. I don't know how to do my own brake pads and there's abs on the bike which I've heard can make it harder.
Cheers!  ____________________ 07' Honda Hornet now full powaah! My guide on performing an oil change!
Last edited by bikertomm on 12:12 - 06 Mar 2014; edited 1 time in total |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Doovy |
This post is not being displayed .
|
 Doovy World Chat Champion

Joined: 21 Jul 2008 Karma :   
|
 Posted: 22:31 - 04 Mar 2014 Post subject: |
 |
|
Servicing a Hornet is piss easy. Do the brakes yourself.
Some mechanics say they won't fit externally supplied parts as if its the wrong fitment, they usually discover this when the bike is up on the ramp and it means wasted time.
To get the filter off easily, drain all the oil out the sump, then hammer a screwdriver in through the filter. Use that as a turning handle, it will come off easily. Just make sure you drain it all first!!
I used some ebay bought brake pads on my Hornet, I think EBC they were.
I'm in North East London, you like look you're on the west of the M25.. if you ever needed a hand I'm sometimes about here. Not had experience with the ABS brakes though. ____________________ Yamaha RXS 100 > Honda CD 250 > Honda Hornet 600 > Honda CBR 600RR > Yamaha RXS 100 > Kawasaki ZX6R J2 > Yamaha FZ1 |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| bikertomm |
This post is not being displayed .
|
 bikertomm World Chat Champion

Joined: 03 Jul 2010 Karma :   
|
 Posted: 22:37 - 04 Mar 2014 Post subject: |
 |
|
Sweet, thanks for that.
I've heard of that screwdriver method!
I've got a paddock stand too (for the rear) so yeah oil change should be easy, wonder what I can get to go wrong..
Cheers for the offer, I'm near High Wycombe.
Hopefully someone may be able to shed some light on the abs issue!
 ____________________ 07' Honda Hornet now full powaah! My guide on performing an oil change! |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Islander |
This post is not being displayed .
|
 Islander World Chat Champion

Joined: 05 Aug 2012 Karma :    
|
 Posted: 22:37 - 04 Mar 2014 Post subject: |
 |
|
The hardest part of servicing a Hornet is changing the plugs. Seriously.
It took me as long to change the plugs as it did to change the oil and filter last service. Fiddly buggers. Brakes are a doddle, filter - remove as above or buy a strap wrench. Don't overtighten the new one - screw it in with your fingertips then nip it up with a full hand grip. |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Clutchy |
This post is not being displayed .
|
 Clutchy World Chat Champion

Joined: 08 Nov 2011 Karma :   
|
 Posted: 22:52 - 04 Mar 2014 Post subject: |
 |
|
Make sure you turn the sump bolt the correct way, working on bikes upside down means you can forget sometimes lol ____________________ Malaguti F12 Phantom-Dead, Suzuki AY50- Dead, NRG power DD LQ, CBR125.
*33 BHP restriction up on 10/12/14* Current bikes/car: SV 650 S/ MKIV GOLF
Guide to pass your test with no lessons! |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Islander |
This post is not being displayed .
|
 Islander World Chat Champion

Joined: 05 Aug 2012 Karma :    
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Clutchy |
This post is not being displayed .
|
 Clutchy World Chat Champion

Joined: 08 Nov 2011 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| -Matt- |
This post is not being displayed .
|
 -Matt- World Chat Champion
Joined: 28 Apr 2013 Karma :     
|
 Posted: 01:39 - 05 Mar 2014 Post subject: |
 |
|
I've taken plenty of my own supplied parts for fitment at various garages in the past, never had any comments or problems. That being said definately do it all yourself - oil and pads are dead easy - were the first couple of things i did when i started doing my own work on the bike a year or two back.
Few youtube videos and you'll know exactly what you're doing
I've used this for years without problems. [email protected] (can get cheaper on offer sometimes) |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| janner_10 |
This post is not being displayed .
|
 janner_10 World Chat Champion

Joined: 26 Sep 2011 Karma :     
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| bikertomm |
This post is not being displayed .
|
 bikertomm World Chat Champion

Joined: 03 Jul 2010 Karma :   
|
 Posted: 12:45 - 05 Mar 2014 Post subject: |
 |
|
Sweet, cheers for the tips boys. Most parts on order so this weekend will hopefully get something done  ____________________ 07' Honda Hornet now full powaah! My guide on performing an oil change! |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Doovy |
This post is not being displayed .
|
 Doovy World Chat Champion

Joined: 21 Jul 2008 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Minty |
This post is not being displayed .
|
 Minty World Chat Champion

Joined: 23 Dec 2005 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| ficedula |
This post is not being displayed .
|
 ficedula Scooby Slapper
Joined: 10 Aug 2011 Karma :  
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| -Matt- |
This post is not being displayed .
|
 -Matt- World Chat Champion
Joined: 28 Apr 2013 Karma :     
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Minty |
This post is not being displayed .
|
 Minty World Chat Champion

Joined: 23 Dec 2005 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Doovy |
This post is not being displayed .
|
 Doovy World Chat Champion

Joined: 21 Jul 2008 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Minty |
This post is not being displayed .
|
 Minty World Chat Champion

Joined: 23 Dec 2005 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Clutchy |
This post is not being displayed .
|
 Clutchy World Chat Champion

Joined: 08 Nov 2011 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Islander |
This post is not being displayed .
|
 Islander World Chat Champion

Joined: 05 Aug 2012 Karma :    
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| ficedula |
This post is not being displayed .
|
 ficedula Scooby Slapper
Joined: 10 Aug 2011 Karma :  
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| bikertomm |
This post is not being displayed .
|
 bikertomm World Chat Champion

Joined: 03 Jul 2010 Karma :   
|
 Posted: 19:23 - 05 Mar 2014 Post subject: |
 |
|
I've just seen a cheeky tip: put a bit of tinfoil on the downpipes before you take the oil filter off to prevent most of it making a stinky mess when you start up the bike..  ____________________ 07' Honda Hornet now full powaah! My guide on performing an oil change! |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| bladerunner |
This post is not being displayed .
|
 bladerunner World Chat Champion
Joined: 09 Sep 2006 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| bikertomm |
This post is not being displayed .
|
 bikertomm World Chat Champion

Joined: 03 Jul 2010 Karma :   
|
 Posted: 12:13 - 06 Mar 2014 Post subject: |
 |
|
Will do!
Does anyone know if abs will affect anything when putting in new brake pads?
It seems fairly simple to do after watching some videos and I am up for it, I just want to make sure that because I have abs it's no problem..
Cheers  ____________________ 07' Honda Hornet now full powaah! My guide on performing an oil change! |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Doovy |
This post is not being displayed .
|
 Doovy World Chat Champion

Joined: 21 Jul 2008 Karma :   
|
 Posted: 14:16 - 06 Mar 2014 Post subject: |
 |
|
I think because of the ABS it may be harder to push the pistons back into the caliper.. so you may need to release the bleed nipple for the pressure. You may also need to bleed the brakes if air gets into the system  ____________________ Yamaha RXS 100 > Honda CD 250 > Honda Hornet 600 > Honda CBR 600RR > Yamaha RXS 100 > Kawasaki ZX6R J2 > Yamaha FZ1 |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| bikertomm |
This post is not being displayed .
|
 bikertomm World Chat Champion

Joined: 03 Jul 2010 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
Old Thread Alert!
The last post was made 12 years, 259 days ago. Instead of replying here, would creating a new thread be more useful? |
 |
|
|